Huawei AT815SN Access Terminal
-
Model:
Huawei AT815SN Access Terminal -
Detail:
Huawei AT815SN outdoor AT connects indoor wired/wireless stations to outdoor APs and can also function as a wireless bridge. -
Price:
$620.00
- Free Technical Support
- Product Quality Protection
- On-time Shipment
- +86 755 8215 3862
- leo@uonel.com
- ywx39894
Share:
Overview
Huawei AT815SN outdoor AT connects indoor wired/wireless stations to outdoor APs and can also function as a wireless bridge.
.jpg)
- 1. GE/PoE interface: a 10M/100M/1,000M interface, which connects to the wired Ethernet and supports the PoE power supply
- 2. ETH interface: a 10M/100M interface, which connects to the wired Ethernet
- 3. Default button: restores the factory settings if you remove the screw and hold down the button for more than 3 seconds
-
Type Color Status Description Default Status after Power-on Green Steady on The device is just powered on and the software is not started yet.
Software Startup Status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green. Running Status Green Blinking once every 2s (0.5 Hz) The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP. The system enters the Uboot CLI. Alarm Green Blinking once every 0.25s (4 Hz) The software is being upgraded.
Fault Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.
Copyrihgt © uonel.com All Rights Reserved | |
Powered by Reanod
